Sealer 190 1 LTR MYK

*A8004 *Brand/Series: MYK *Waiting Period: 7-14 Days *Product Description MYKL-TDS-L 190 –REV 01; 06/18L 190 SEALERNaturalStone protectorFeatures / Benefits •Mild penetrating sealer that protects against stains. •Non-flammable solution which cures to an invisiblewater repellant coating •Weather resistant -protects stone, brick and tile·Easy to apply –no special tools required ·Low VOCMild penetrating sealer that protects against stains.•Non-flammable solution which cures to an invisiblewater repellant coating •Weather resistant -protects stone, brick and tile·Easy to apply –no special tools required ·Low VOC Marble •Brick, •Limestone •Granite •Sand Stone •Cement grout surface Application Designed specifically for Interior and exterior applicationsto protectnatural stoneinstallationsagainstwater based stains. Itcan also be used as a grout release by treating ceramic/ Vitrifiedtile prior to the application of grout. Preparation The surface to be sealed must be clean and dry. Surface temperature should be between 45-85F (7-30C). Test on a small unobtrusive area before coating entire surface.ApplicationNOTE: Shake the container well for one minute before opening and using the sealer.Apply the Laticrete 190 sealer with a white sponge, brush or sprayer. Allow to penetrate 5 to 10 minutes. Wipe Off excess sealersby buffing it with white softcottoncloth. Allow LATICRETE 190 Sealer to air cure for 72hours. One application is sufficient for most installations.In case of highly porous substrates, a secondand thirdapplication may be required. Note: Excess material should be wiped from the surface of marble, granite, glazed tile or rock when applied on horizontal surfaces. A white residue may occur if excess material is allowed to dry on a polishedsurface.In case of white residue appearance, do another application with the same sealer and immediately buff the surface with soft cotton cloth to remove excess sealer. Limitations Do not apply when surface or temperature is below 45°F (7°C) Not recommended for wet areas like swimming pools and wash areas Cautions LATICRETE 190 Sealer is strongly alkaline.Protective gloves and eye protection should be worn when using the product. When spraying avoid inhaling the vapors of mist. Do not take internally. Keep out of reach of children. Protect Aluminum and glasssurface from direct prolonged exposure to liquid or spray. Wear rubber gloves when applying with sponge The application of Sealer is the final treatment to tile or stone surface. No further treatments like polishing, cleaning or application ofother primers or sealers is recommended as they hamperthe performance of sealer.